Maj README

README.md

@@ -19,9 +19,9 @@ git clone https://git.lebartal.tech/lebartal/Linux.git
 
 3. Lancement du script
 ```
-cd Linux/AutoInstall/
+cd Linux/
-chmod +x autoinstall.ksh
+chmod +x menu.ksh
-./autoinstall.ksh
+./menu.ksh
 ```
 
 # Changelog
@@ -29,6 +29,7 @@ chmod +x autoinstall.ksh
 - 09/11/25 : V1.0 - Creation
 - 23/11/25 : Reprise du script et modification du squelette pour évolutions futures.
 - 18/01/26 : Corrections scripts, ajouts de modules et de packages.
+- 15/02/26 : ajouts fichiers config de p10k et zsh (evite la reconfiguration manuelle)
 
 
 ### Contenu
@@ -45,6 +46,12 @@ chmod +x autoinstall.ksh
 
 ### DONE
 
+---
+### Problemes Connus
+
+ - Apres l'install, la commande `ll` manque de droits (meme en root) pour afficher le contenu de certains dossiers.
+ > `ll` est un alias de la commande `lsd` installé en `snap` mais `snap` n'a pas les droits car compartimenté dans le dossier
+
 
 ### ABANDONNE
 - [ ] (AutoInstall) Faire une Interface graphique utilisateur avec Zenity

menu.ksh

@@ -1,16 +1,22 @@
 #! /bin/bash
-set -eo pipefail
+#set -eo pipefail
+
+
+
+#variables
+export ROOT_DIR=$(cd "$(dirname "$0")" && pwd)
+
 
 function check_source
 {
     source=$1
-    if [[ -f "./sources/${source}" ]]; then
+    if [[ -f "${ROOT_DIR}/sources/couleurs.ksh" ]]; then
     {
-        . ./sources/${source}
+        . "${ROOT_DIR}/sources/couleurs.ksh"
     }
     else
     {
-        echo "Erreur : Impossible de charger les sources ${source}"
+        echo "${ROUGE}Erreur : Impossible de charger les dependances${RESET}"
         exit 1
     }
     fi
@@ -21,11 +27,10 @@ check_source "couleurs.ksh"
 
 #Affichage du Menu
 clear
-echo -e "${SOULIGNE}===== MENU GESTION LINUX =====${RESET} \n"
+echo -e "${BG_NOIR}${VERT}===== MENU GESTION LINUX =====${RESET} \n"
-echo -e "Votre Systeme : ${BG_NOIR}${BLEU}${systeme}${RESET}"
 echo ""
 echo "Quel module lancer ? "
-echo " [1] - AutoInstall"
+echo -e " [1] - ${SOULIGNE}AutoInstall${RESET}"
 echo " [2] - MAJ"
 echo " [0] - Quitter"
 read reponse
@@ -33,11 +38,11 @@ read reponse
 case ${reponse} in
 	
     1)
-    . ./modules/AutoInstall/autoinstall.ksh
+    . ${ROOT_DIR}/modules/AutoInstall/autoinstall.ksh
     ;;
 
     2)
-    . ./modules/AutoMaj/MAJ.ksh
+    . ${ROOT_DIR}/modules/AutoMaj/MAJ.ksh
     ;;
 
     0)

modules/AutoInstall/autoinstall.ksh

@@ -1,34 +1,34 @@
 #! /bin/bash
-set -eo pipefail
 
 #--------------------------------------------
 # Script autoinstallation et configuration Ubuntu/Debian
 #--------------------------------------------
 
-function verif_source
+#variables
-{
-    source=$1
-    if [[ -f "./modules/AutoInstall/sources/${source}" ]]; then
-    {
-        . ./modules/AutoInstall/sources/${source}
-    }
-    else
-    {
-        echo "Erreur : Impossible de charger les sources ${source}"
-        exit 1
-    }
-    fi
-}
 
-verif_source "fonctions.ksh"
+if [[ -z "${ROOT_DIR}" ]]; then
-verif_source "couleurs.ksh"
+    echo "Erreur : Veuillez lancer ce script via le menu.ksh principal."
+    exit 1
+fi
+
+dir_script=$(cd "$(dirname "$0")" && pwd)
+
+#Chargement des couleurs (via la racine globale)
+if [[ -f "${ROOT_DIR}/sources/couleurs.ksh" ]]; then
+    . "${ROOT_DIR}/sources/couleurs.ksh"
+fi
+
+# Chargement des fonctions locales
+if [[ -f "${ROOT_DIR}/modules/AutoInstall/sources/fonctions.ksh" ]]; then
+    . "${ROOT_DIR}/modules/AutoInstall/sources/fonctions.ksh"
+fi
 
 # Recuperation de la distribution
 
 if command -v lsb_release >/dev/null 2>&1; then
     systeme=$(lsb_release -d | cut -c 14-)
 else
-    systeme="Inconnu (lsb_release non trouvé)"
+    systeme="${ROUGE}Inconnu${RESET}"
 fi
 
 
@@ -38,19 +38,50 @@ echo -e "${SOULIGNE}===== AUTOINSTALL =====${RESET} \n"
 echo -e "Votre Systeme : ${BG_NOIR}${BLEU}${systeme}${RESET}"
 echo ""
 echo "Que voulez vous faire ? "
-echo " [1] - Mettre a jour les paquets"
+echo "[1] - Installation complete"
-echo " [2] - Mettre a jour les paquets et le systeme"
+echo "[2] - Installer Nala"
-echo " [0] - Quitter"
+echo "[3] - Installation Packages"
+echo "[8] - Installer Atuin"
+echo "[9] - Installer Zsh+Plugins"
+echo "[0] - Quitter"
 read reponse
 
 case ${reponse} in
 	
     1)
     maj_depot
+    maj_systeme
+    install_nala
+    install_packages
+    install_flatpaks
+    install_atuin
+    install_mainline
+    install_nerdfont
+    install_zsh
+
+    cp sources/conf/.p10k.zsh ${HOME}
+    cp sources/conf/.zshrc ${HOME}
+    #config_zsh
+    #config_alias
     ;;
 
     2)
-    maj_systeme
+    install_nala
+    ;;
+
+    3)
+    install_packages
+    ;;
+
+    8)
+    install_atuin
+    ;;
+
+    9)
+    install_nerdfont
+    install_zsh
+    zsh
+    config_zsh
     ;;
 
     0)

modules/AutoInstall/sources/fonctions.ksh

@@ -1,62 +1,59 @@
-#!/bin/bash
+#! /bin/bash
-set -eou pipefail
 
-# Couleurs de texte (Foreground)
+if [[ -z "${ROOT_DIR}" ]]; then
-NOIR='\e[30m'
+    echo "Erreur : Veuillez lancer ce script via le menu.ksh principal."
-ROUGE='\e[31m'
+    exit 1
-VERT='\e[32m'
+fi
-JAUNE='\e[33m'
-BLEU='\e[34m'
-VIOLET='\e[35m'
-CYAN='\e[36m'
-BLANC='\e[37m'
 
-# Couleurs de fond (Background)
+dir_script=$(cd "$(dirname "$0")" && pwd)
-BG_NOIR='\e[40m'
-BG_ROUGE='\e[41m'
-BG_VERT='\e[42m'
-BG_JAUNE='\e[43m'
 
-# Styles
+#Chargement des couleurs (via la racine globale)
-GRAS='\e[1m'
+if [[ -f "${ROOT_DIR}/sources/couleurs.ksh" ]]; then
-SOULIGNE='\e[4m'
+    . "${ROOT_DIR}/sources/couleurs.ksh"
-RESET="\e[0m"
+fi
 
+#Verif gestionnaire packages
+if command -v nala >/dev/null 2>&1; then
+{
+    gest_pkg="nala"
+}
+else
+{
+    gest_pkg="apt"
+}
+fi
 
 # -------------- FONCTIONS ---------------
-function maj_depot
+maj_depot()
 {
    #Actualisation depots
-    apt update
+    ${gest_pkg} update
-
-    # Maj Systeme avant AutoInstall
-    apt full-upgrade -y 
 }
 
 
-function maj_systeme
+maj_systeme()
 {
-    nala full-upgrade -y
+    ${gest_pkg} full-upgrade -y
 }
 
-function maj_packages
+maj_packages()
 {
-    nala upgrade -y
+    ${gest_pkg} upgrade -y
 }
 
-function install_nala
+install_nala()
 {
     #Installation NALA
     curl https://gitlab.com/volian/volian-archive/-/raw/main/install-nala.sh | bash
 }
 
-function install_nerdfont
+install_nerdfont()
 {
     #Telechargement Nerdfonts (Police Hackfont, la plus lisible)
     mkdir -p ~/.local/share/fonts/
 
     #Installation de la Police
-    http -o ~/.local/share/fonts/Hack.zip --download https://github.com/ryanoasis/nerd-fonts/releases/download/v3.4.0/Hack.zip
+    wget -O ~/.local/share/fonts/Hack.zip https://github.com/ryanoasis/nerd-fonts/releases/download/v3.4.0/Hack.zip
     unzip ~/.local/share/fonts/Hack.zip
     rm ~/.local/share/fonts/Hack.zip
 
@@ -64,45 +61,45 @@ function install_nerdfont
     fc-cache -f
 }
 
-function install_packages
+install_packages()
 {
     add-apt-repository ppa:zhangsongcui3371/fastfetch -y
-    nala install btop httpie fastfetch
+    ${gest_pkg} install btop duf httpie fastfetch -y
-    snap install lsd
+    snap install lsd   
-    
 
 }
 
-function install_flatpaks
+install_flatpaks()
 {
     # 12/01/2026 desactivation des flatpak, ces derniers sont installables directement dans les depots de bases.
     #Installation Flatpak
     #add-apt-repository ppa:flatpak/stable -y
-    nala install flatpak -y
+    ${gest_pkg} install flatpak -y
-    nala install gnome-software-plugin-flatpak -y
+    ${gest_pkg} install gnome-software-plugin-flatpak -y
     #flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
 
     #Installation Packages Flatpak
     # <a faire plus tard>
 }
 
-function install_mainline
+install_mainline()
 {
     #Installation Mainline
     add-apt-repository ppa:cappelikan/ppa -y
-    nala install mainline -y
+    ${gest_pkg} install mainline -y
 }
 
-function install_atuin
+install_atuin()
 {
     #Installation Atuin
     bash <(curl https://raw.githubusercontent.com/atuinsh/atuin/main/install.sh)
+    echo -e "${SOULIGNE}${VERT}✅ Atuin est installe, merci de faire une deco/reco${RESET}"
 }
 
-function install_zsh
+install_zsh()
 # ainsi que les plugins
 {
-    nala install zsh -y
+    ${gest_pkg} install zsh -y
 
     #Configuration zsh+plugins
     sh -c "$(curl -fsSL https://raw.github.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
@@ -121,7 +118,7 @@ function install_zsh
     #source ~/.zshrc
 }
 
-function config_alias
+config_alias()
 {
     #Configuration megacommande maj"
     echo "alias maj='nala full-upgrade && flatpak upgrade && mainline install-latest && update-grub'" >> ~/.zshrc
@@ -132,13 +129,13 @@ function config_alias
     echo "alias ll='lsd -ltr'" >> ~/.zshrc
 
     # commande dl pour download
-    echo "alias dl ='http --download'" >> ~/.zshrc
+    #echo "alias dl ='http --download'" >> ~/.zshrc
 
     # commande disque pour espace disque
     echo "alias disque='duf' " >> ~/.zshrc
 }
 
-function config_zsh
+config_zsh()
 {
     #Relancer la config de zsh
     p10k configure

modules/AutoMaj/MAJ.ksh

@@ -12,6 +12,11 @@
 #
 ###############################################################
 
+if [[ -z "${ROOT_DIR}" ]]; then
+    echo "Erreur : Veuillez lancer ce script via le menu.ksh principal."
+    exit 1
+fi
+
 # ---------- Couleurs (facultatives) ----------
 # Certaines consoles ne supportent pas tput, on prévoit un fallback vide.
 RED=$(tput setaf 1 2>/dev/null || printf '')
@@ -20,7 +25,8 @@ YELLOW=$(tput setaf 3 2>/dev/null || printf '')
 RESET=$(tput sgr0 2>/dev/null || printf '')
 
 # ---------- Fonction de journalisation ----------
-log() {
+log() 
+{
     # $1 = niveau (INFO|OK|ERR)
     # $2 = message
     case "$1" in
@@ -32,7 +38,8 @@ log() {
 }
 
 # ---------- Wrapper d’exécution de commande ----------
-run_cmd() {
+run_cmd() 
+{
     # On exécute la commande passée en arguments séparés
     # "$@" préserve les espaces éventuels dans chaque argument.
     "$@"
@@ -46,27 +53,32 @@ run_cmd() {
 }
 
 # ---------- Étapes de mise à jour ----------
-update_pkg_list() {
+update_pkg_list() 
+{
     log INFO "Mise à jour de la liste des paquets…"
     run_cmd apt-get update -y
 }
 
-upgrade_installed() {
+upgrade_installed() 
+{
     log INFO "Mise à jour des paquets déjà installés…"
     run_cmd apt-get upgrade -y
 }
 
-dist_upgrade_os() {
+dist_upgrade_os() 
+{
     log INFO "Dist-upgrade de l’OS…"
     run_cmd apt-get dist-upgrade -y
 }
 
-autoremove_obsolete() {
+autoremove_obsolete() 
+{
     log INFO "Suppression des paquets obsolètes…"
     run_cmd apt-get autoremove -y
 }
 
-clean_cache() {
+clean_cache() 
+{
     log INFO "Nettoyage du cache des paquets…"
     run_cmd apt-get clean -y
 }

sources/conf/.zshrc

@@ -0,0 +1,127 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# If you come from bash you might have to change your $PATH.
+# export PATH=$HOME/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+
+# Path to your Oh My Zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# Set name of the theme to load --- if set to "random", it will
+# load a random theme each time Oh My Zsh is loaded, in which case,
+# to know which specific one was loaded, run: echo $RANDOM_THEME
+# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
+#ZSH_THEME="robbyrussell"
+ZSH_THEME="agnoster"
+
+# Set list of themes to pick from when loading at random
+# Setting this variable when ZSH_THEME=random will cause zsh to load
+# a theme from this variable instead of looking in $ZSH/themes/
+# If set to an empty array, this variable will have no effect.
+# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
+
+# Uncomment the following line to use case-sensitive completion.
+# CASE_SENSITIVE="true"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+# Uncomment one of the following lines to change the auto-update behavior
+# zstyle ':omz:update' mode disabled  # disable automatic updates
+# zstyle ':omz:update' mode auto      # update automatically without asking
+# zstyle ':omz:update' mode reminder  # just remind me to update when it's time
+
+# Uncomment the following line to change how often to auto-update (in days).
+# zstyle ':omz:update' frequency 13
+
+# Uncomment the following line if pasting URLs and other text is messed up.
+# DISABLE_MAGIC_FUNCTIONS="true"
+
+# Uncomment the following line to disable colors in ls.
+# DISABLE_LS_COLORS="true"
+
+# Uncomment the following line to disable auto-setting terminal title.
+# DISABLE_AUTO_TITLE="true"
+
+# Uncomment the following line to enable command auto-correction.
+# ENABLE_CORRECTION="true"
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+# COMPLETION_WAITING_DOTS="true"
+
+# Uncomment the following line if you want to disable marking untracked files
+# under VCS as dirty. This makes repository status check for large repositories
+# much, much faster.
+# DISABLE_UNTRACKED_FILES_DIRTY="true"
+
+# Uncomment the following line if you want to change the command execution time
+# stamp shown in the history command output.
+# You can set one of the optional three formats:
+# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
+# or set a custom format using the strftime function format specifications,
+# see 'man strftime' for details.
+# HIST_STAMPS="mm/dd/yyyy"
+
+# Would you like to use another custom folder than $ZSH/custom?
+# ZSH_CUSTOM=/path/to/new-custom-folder
+
+# Which plugins would you like to load?
+# Standard plugins can be found in $ZSH/plugins/
+# Custom plugins may be added to $ZSH_CUSTOM/plugins/
+# Example format: plugins=(rails git textmate ruby lighthouse)
+# Add wisely, as too many plugins slow down shell startup.
+plugins=(git)
+
+source $ZSH/oh-my-zsh.sh
+
+# User configuration
+
+# export MANPATH="/usr/local/man:$MANPATH"
+
+# You may need to manually set your language environment
+# export LANG=en_US.UTF-8
+
+# Preferred editor for local and remote sessions
+# if [[ -n $SSH_CONNECTION ]]; then
+#   export EDITOR='vim'
+# else
+#   export EDITOR='mvim'
+# fi
+
+# Compilation flags
+# export ARCHFLAGS="-arch $(uname -m)"
+
+# Set personal aliases, overriding those provided by Oh My Zsh libs,
+# plugins, and themes. Aliases can be placed here, though Oh My Zsh
+# users are encouraged to define aliases within a top-level file in
+# the $ZSH_CUSTOM folder, with .zsh extension. Examples:
+# - $ZSH_CUSTOM/aliases.zsh
+# - $ZSH_CUSTOM/macos.zsh
+# For a full list of active aliases, run `alias`.
+#
+# Example aliases
+# alias zshconfig="mate ~/.zshrc"
+# alias ohmyzsh="mate ~/.oh-my-zsh"
+source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
+source ~/.zsh/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh
+source ~/.zsh/powerlevel10k/powerlevel10k.zsh-theme
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+alias maj="atuin-update && nala full-upgrade -y && flatpak upgrade -y && mainline install-latest && update-grub || fwupdmgr refresh || fwupdmgr get-updates && fwupdmgr upgrade || omz update"
+#alias maj="nala full-upgrade -y && flatpak upgrade -y && update-grub && fwupdmgr refresh || fwupdmgr get-updates && fwupdmgr upgrade"
+#alias maj="apt update && apt full-upgrade -y && flatpak upgrade -y && mainline install-latest && update-grub && fwupdmgr refresh || fwupdmgr get-updates && fwupdmgr upgrade"
+alias ll="lsd -ltrh"
+
+
+. "$HOME/.atuin/bin/env"
+
+eval "$(atuin init zsh)"

sources/couleurs.ksh

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Couleurs de texte (Foreground)
+NOIR='\e[30m'
+ROUGE='\e[31m'
+VERT='\e[32m'
+JAUNE='\e[33m'
+BLEU='\e[34m'
+VIOLET='\e[35m'
+CYAN='\e[36m'
+BLANC='\e[37m'
+
+# Couleurs de fond (Background)
+BG_NOIR='\e[40m'
+BG_ROUGE='\e[41m'
+BG_VERT='\e[42m'
+BG_JAUNE='\e[43m'
+
+# Styles
+GRAS='\e[1m'
+SOULIGNE='\e[4m'
+RESET="\e[0m"